Almost three of five (60%) of reported home fire deaths in 2007 to 2011 resulted from fires in homes with no smoke alarms or no working smoke alarms. Make sure yours are working; test them every month! Fast Facts about Fire Smoke alarms should be installed on every level of the home (including the basement), outside each sleeping area, and inside each bedroom. Larger homes may need additional smoke alarms. Never remove or disable smoke alarms. Interconnection of smoke alarms is highly recommended; when one smoke alarm sounds, they all do. This is particularly important in larger or multi-story homes, where the sound from distant smoke alarms may be reduced to the point that it may not be loud enough to provide proper warning, especially for sleeping individuals. A licensed electrician can install hard-wired multiple-station alarms. Wireless alarms, which manufacturers have more recently begun producing, can be installed by the homeowner. Test smoke alarms at least monthly by pushing the test button. If an alarm “chirps”, warning the batter is low, replace the battery right away. All smoke alarms, including alarms that use 10-year batteries and those that are hard-wired alarms, should be replaced when they’re 10 years old (or sooner) if they do not respond properly when tested. Never remove or disable a smoke alarm.
*Sources: National Fire Protection Agency (NFPA) *